IBM eserver p Series, Installation Manual

Page: 39 / 76

I/O Drawer PCI Slot LED Definitions
The following table describes the possible states of the LEDs associated with the I/O
drawer PCI slots. These LEDs are located at the rear of the I/O drawer. One LED is
associated with each PCI slot.
LED Indication PCI Slot State Definition
Off Off Slot power is off. It is safe to
remove or replace an adapter.
On (not flashing) On Slot power is on. Do not
remove or replace an adapter.
Flashing slowly (one flash per
second) Identify Slot has been identified by the
software. Do not remove or
replace an adapter at this time.
Flashing fast (six to eight
flashes per second) Action Slot is ready for removal or
replacement of an adapter.
1
2 3 4 5 6 14
13 12
11
10
9 8 7
P1
LED
PCI
Slot
Chapter 3. Installing Options for the System
25