IBM eserver iSeries 270, Installation Manual

Page: 13 / 40

__ 23. Remove the blank filler cards from the positions where you will install the
memory cards by doing the following:
__ a. Push outward on the latches that are located at each end of the filler
card.
__ b.
Remove the filler card from the card socket and discard it.
__ 24. Find the package that contains the new memory cards.
__ 25. Attention: Memory cards are fragile. Handle with care.
Remove a memory card, one at a time , from the static protective package.
__ 26. Refer to Figure 8 on page 10 to install the memory card by doing the
following:
__ a. Look carefully at the notches on the bottom of the memory card. The
distance between the notches and the end of the memory card is
slightly different.
__ b.
Align the card as shown in Figure 8 on page 10.
__ c. Match the keyed notches and push down on the card until the
latches close.
Figure 7. Memory Locations on Card Assembly
Install memory
9