IBM eserver 630 6C4, Service Manual

Page: 509 / 573

Appendix D. Setting Up the System Rack
Before setting up a rack check through the following specifications and clearances, then
go to “Model 6C4 Rack Installation Inventory” on page 492.
Rack Specifications
This section contains specifications for the system rack.
7014 Model T00 and T42 Rack
The mechanical packaging, cooling, power supply, and environmental specifications for
the rack are shown in the following table:
Dimensions
Height 1804 mm 71.0 in.
Capacity 36 EIA Units
With PDP - DC
only 1926 mm 75.8 in.
Width without
side panels 623 mm 24.5 in.
With side panels 644 mm 25.4 in.
Depth with rear
door 1042 mm 41.0 in.
RS/6000 T00 with
both doors 1098 mm 43.3 in.
pSeries T00 with
both doors 1147 mm 45.2 in.
Weight
Base Rack 244 kg 535 lbs
Full Rack
¹
816 kg 1795 lbs.
Electrical
²
(sum specified values for
drawers or enclosures in rack)
AC Rack
Power source
loading maximum
in kVA (per PDB)
⁴
4.8
Voltage range (V
ac) 200 to 240
Frequency (hertz) 50 or 60
Temperature
Requirements (see specifications for drawers or enclosures)
This table continues on the following page.
489