IBM eServer 250 xSeries, User Reference Manual

Page: 54 / 186

40
IBM® xSeries 250: User’s Reference
Removing the server top cover and bezel
Review the information in“Before you begin” on page 36 through “Safety information
statements” on page 38.
Removing the top cover
Note: The illustrations in this book might differ slightly from your hardware.
To remove the server top cover:
1. Loosen the two captive screws on the back edge of the top cover.
2. Slide the top cover slightly toward the rear of the server. Lift the cover off the
server and set the cover aside.
Attention: For proper cooling and airflow, replace the top cover after installing or
removing an option. Operating the server for extended periods of time (over 30
minutes) with the top cover removed might damage server components.
Top cover
Captive screws