IBM DS8900F, Introduction And Planning Manual

Page: 145 / 172

Appendix E. Compliance standards
This product was designed, tested, manufactured, and certified for safe operation. It complies with IEC
60950-1 and/or IEC 62368-1 and where required, to relevant national differences/deviations (NDs) to
these IEC base standards. This includes, but is not limited to: EN (European Norms including all
Amendments under the Low Voltage Directive), UL/CSA (North America bi-national harmonized and
marked per accredited NRTL agency listings), and other such derivative certifications according to
corporate determinations and latest regional publication compliance standardized requirements.
Regulatory Model ID (RMID, for control system base platform): AP2 / DS8900F
If no rack is included with this storage system, the MTM might be located within the hardware
management console (HMC) interface, or on the head unit HMC chassis as a variable Print on Demand
(PoD) label indicating its service identity.
Note: Relevant Machine Type - Models (MT-Ms) may also be used to supplement identification (ID) for
worldwide (WW) co-compliance filings or registrations with regulatory bodies.
©
Copyright IBM Corp. 2019 131