IBM DS8882F, Introduction And Planning Manual

Page: 80 / 164

Processor memory features
These features specify the amount of memory that you need depending on the
processors in the storage system.
Feature codes for system memory
Use these feature codes to order system memory for the DS8882F.
Note: Memory is not the same as cache. The amount of cache is less than the
amount of available memory. See the DS8000 Storage Management GUI.
Table 24. Feature codes for system memory
Feature code Description Model
4233
1
64 GB system memory 983 (6-core)
4234
1
128 GB system memory 983 (6-core)
4235
1
256 GB system memory 983 (6-core)
Notes:
1. Feature codes 4233, 4234, and 4235 require 6-core processor license feature code 4421.
Power features
You must specify the power features to include on your storage system.
Power cords
A pair of power cords (also known as power cables) is required.
Feature codes for power cords
Use these feature codes to order power cords. Ensure that you meet the
requirements for each power cord and connector type that you order.
Table 25. Feature codes for power cords
Feature code Power cord facility plug type Plug diagram
1021 Single-phase power cord, 250 V, 20 A
NEMA L6-20P
E
1022 Single-phase power cord, 250 V, 16 A
CEE 7 VII
E
N L
70
DS8882F Introduction and Planning Guide