The following concepts are used in storage configuration.
Arrays
An array, also referred to as a managed array, is a group of storage devices
that provides capacity for a pool. An array generally consists of 8 drives
that are managed as a Redundant Array of Independent Disks (RAID).
Pools
A storage pool is a collection of storage that identifies a set of storage
resources. These resources provide the capacity and management
requirements for arrays and volumes that have the same storage type,
either fixed block (FB) or count key data (CKD).
Volumes
A volume is a fixed amount of storage on a storage device.
LSS
The logical subsystem (LSS) that enables one or more host I/O interfaces to
access a set of devices.
Hosts
A host is the computer system that interacts with the storage system. Hosts
defined on the storage system are configured with a user-designated host
type that enables the storage system to recognize and interact with the
host. Only hosts that are mapped to volumes can access those volumes.
Logical configuration of the storage system begins with managed arrays. When
you create storage pools, you assign the arrays to pools and then create volumes in
the pools. FB volumes are connected through host ports to an open systems host.
CKD volumes require that logical subsystems (LSSs) be created as well so that they
can be accessed by an IBM Z host.
Pools must be created in pairs to balance the storage workload. Each pool in the
pool pair is controlled by a processor node (either Node 0 or Node 1). Balancing
the workload helps to prevent one node from doing most of the work and results
in more efficient I/O processing, which can improve overall system performance.
Both pools in the pair must be formatted for the same storage type, either FB or
CKD storage. You can create multiple pool pairs to isolate workloads.
ds800001
Volumes
CKD
Volumes
FB
Pools
FB
CKD
Pools
CKD
LSSs
Arrays
z Systems
Hosts
Open Systems
Hosts
Figure 3. Logical configuration sequence
12
DS8882F Introduction and Planning Guide
Summary of Contents for DS8882F
