IBM DS8800, Introduction And Planning Manual, Page: 233 / 256

Appendix F. Notification work sheets
These work sheets allow you to specify your preferred method of being notified
about serviceable events.
Note: The IBM service representative sets up the notification process.
The notification work sheets allow you to specify the settings to use when you
want the storage system to notify you or other people in our organization when
you have serviceable events.
There are two notification work sheets:
v SNMP trap notification work sheet
v
Email notification work sheet
SNMP trap notification work sheet
This work sheet allows you to specify the setting for SNMP trap notifications.
The SNMP trap notification work sheet allows you to indicate whether you want
to receive Simple Network Management Protocol (SNMP) trap notifications when a
management console encounters serviceable events. For more information about
SNMP, visit the IBM System Storage DS8000 Information Center and select
Configuring > SNMP traps.
Note: Remote copy status reporting for Copy Services requires SNMP for
open-systems hosts.
Work sheet purpose
IBM service representatives use the information on the SNMP trap notification
work sheet to customize your storage system for SNMP trap notifications.
Work sheet and instructions
You must complete Table 75 on page 212 for all installations that include a
management console.
Notes:
1. Bolded options in the MC1 and MC2 columns indicate default settings.
2. Management console is abbreviated as MC for the following table.
© Copyright IBM Corp. 2004, 2012
211