IBM CT-618, Installation Manual, Page: 17 / 84

IBM Telephony Installations
IBM CTS Installation Guide 11
b) Enter the server’s IP address when prompted, then click OK.
Note: If using a system with DHCP (Dynamic Host Configuration
Protocol), make sure that you specify a static IP address, rather than
accepting the automatic IP address assignment.Insert the Lucent
license disk when requested, then click OK and remove diskette.
c) When Telephony Services installation is complete, click OK.
2. Btrieve Workstation Engine Installation
a) The Welcome screen will display. After reading, click Next.
b) The Btrieve Technologies installation will prompt you for locations and
names of the Btrieve Database folder and Program folder. You may
accept the defaults or modify these entries.
c) You may choose to view the Read Me file. Click finish when complete.
3. Telephony Services 32-bit Windows client installation .
a) The Welcome screen will display. After reading, click Next.
b) Check box to install Telephony Services Administration (required for
security level 2).
c) Select destination directory.
d) Add server name, then click Next. The installer will verify locations
and search for older versions of files.
e) When complete, click OK.
f) The Configuration Assistant will appear, displaying the suggested
settings for your CT-618 boards. Click OK.
4. IBM VoiceMaster installation
a) The Welcome screen will display. After reading, click Next.
b) The License Agreement will display. After reading, click Next.
c) The Release Notes will display. After reading, click Next.
d) The selection window will display options for VoiceMaster and Voice
Files. The selection boxes for both options
must be checked.
e) The next window displayed will prompt you for the Telephony server
location. Make sure the information is correct, then click Next.
f) The Voice files window will prompt for destination of voice files. Click
Next.