IBM Cloud Object Storage System Slicestor 2212..., Appliance Manual

Page: 33 / 50

Chapter 5. Appliance physical interface
The physical interface for the appliance consists of buttons and LEDs on the front panel and ports and
LEDs on the back panel.
Front control panel
The power status and the hard disk drive and network activity of the appliance can be read from its front
control panel, as shown in the following figure.
Physical buttons
The appliance includes two push buttons on the right of the front panel:
Reboots the system.
Applies or removes power from the power supply to the appliance. Powering down the
appliance removes the main power, but supplies stand-by power. The appliance must be
unplugged before servicing.
LEDs
The control panel has five LEDs to provide critical information for different components:
Power supplied to PSUs - lit when the appliance is operating.
Hard disk activity.
Network activity on ETH0 when it is flashing.
Network activity on ETH1 when it is flashing.
Power supply failure when it is flashing.
Figure 20. Front panel buttons and LEDs for the appliance
© Copyright IBM Corp. 2016, .
15