background image

6

Brocade 2-Port 10GbE Converged Network Adapter for IBM BladeCenter Installation and User’s Guide

The IBM Documentation CD

1

IBM BladeCenter SAN Solutions Guide 

This document provides user-oriented information about how the BladeCenter Fibre Channel 
optional devices are used to provide different SAN storage solutions for different application 
requirements. 

IBM BladeCenter Fibre Channel I/O Interoperability Guide

 

This document provides detailed Fibre Channel I/O-module configuration data and 
step-by-step configuration procedures for integrating the BladeCenter unit into other vendor 
switch fabrics. Each vendor configuration includes an initial integration checklist, configuration 
limitations, supported I/O module and firmware versions, specific management-application 
operations, and a successful-integration checklist.The most recent versions of this and other 
BladeCenter documentation are at 

http://www.ibm.com/systems/support/

.

The most recent versions of this and other BladeCenter documentation are at 

http://www.ibm.com/systems/support/

Additionally, most BladeCenter documentation is now available from the IBM Systems Information 
Center. To access this information, complete the following steps. 

1. Go to 

http://publib.boulder.ibm.com/infocenter/bladectr/documentation/index.jsp

2. In the Contents pane, select Combined IBM Systems Information.

3. Select Systems hardware. 

4. Select BladeCenter information.

The IBM Documentation CD 

The 

IBM Documentation CD

 contains documentation for your BladeCenter product in Portable 

Document Format (PDF) and includes the IBM Documentation Browser to help you find information 
quickly. 

Hardware and software requirements 

You can run the 

IBM Documentation CD

 on any system that meets the hardware and software 

requirements. 

The IBM Documentation CD requires the following minimum hardware and software: 

Microsoft® Windows® XP, Windows 2000, or Red Hat Linux® 

100 MHz microprocessor v 32 MB of RAM 

Adobe® Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating systems

Using the Documentation Browser 

Use the Documentation Browser to browse the contents of the CD, read brief descriptions of the 
documents, and view documents, using Adobe Acrobat Reader or xpdf. The Documentation 
Browser automatically detects the regional settings in use in your system and displays the 
documents in the language for that region (if available). If a document is not available in the 
language for that region, the English-language version is displayed. 

Summary of Contents for Brocade











































































Reviews: