7.
When testing is complete, press
F3
until the Diagnostic Operating Instructions
screen is displayed; then press
F3
again to exit the diagnostic program.
Using the diagnostics program
Follow the basic procedures for running the diagnostics program.
1.
Start the diagnostics from the AIX operating system, from a CD, or from a
management server. See “Starting AIX concurrent diagnostics” on page 189,
“Starting stand-alone diagnostics from a CD” on page 190, or “Starting
stand-alone diagnostics from a NIM server” on page 191.
2.
The Function Selection menu is displayed. Use the steps listed to perform one
of the following tasks:
v
Problem Determination
a.
From the Function Selection menu, select
Diagnostic Routines
and press
Enter.
b.
From the Diagnostic Mode Selection menu, select
Problem Determination
c.
Select the resource to be tested and press
F7=Commit
.
d.
Record any results provided and go to “Service request numbers (SRNs)”
on page 141 to identify the failure and perform the action(s).
e.
When testing is complete, press
F3
to return to the Diagnostic Selection
menu. If you want to run another test, press
F3
again to return to the
Function Selection menu.
v
System Verification
a.
From the Function Selection menu, select
Diagnostic Routines
and press
Enter.
b.
From the Diagnostic Mode Selection menu, select
System Verification
.
c.
Select the resource to be tested and press
F7=Commit
.
d.
Record any results provided and go to “Service request numbers (SRNs)”
on page 141 to identify the failure and perform the action(s).
e.
When testing is complete, press
F3
to return to the Diagnostic Selection
menu. If you want to run another test, press
F3
again to return to the
Function Selection menu.
v
Task selection
a.
From the Function Selection menu, select
Task Selection
and press Enter.
b.
Select the task to be run and press
Enter
.
c.
If the Resource Selection List menu is displayed, select the resource on
which the task is to be run and press
F7=Commit
.
d.
Follow the instruction for the selected task.
e.
When the task is complete, press
F3
to return to the Task Selection List
menu. If you want to run another test, press
F3
again to return to the
Function Selection menu.
192
JS12 Type 7998: Problem Determination and Service Guide
Summary of Contents for BladeCenter JS12
