IBM BladeCenter HT 8740, Problem Determination And Service Manual

Page: 71 / 158

Removing a CompactFlash module
To remove a CompactFlash module, complete the following steps.
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 31.
2. Pull out the media tray from the BladeCenter HT unit so that the CompactFlash
connectors are accessible (see “Removing a media tray” on page 51).
3. Press the release button next to the CompactFlash module you are removing.
The release button extends from the media tray.
4. Press the release button again to eject the CompactFlash module from the
media tray.
5. Press the release button again to return the release button into the in position.
6. If you are instructed to return the CompactFlash module, follow all packaging
instructions and use any packaging materials for shipping that are supplied to
you.
Chapter 4. Removing and replacing BladeCenter HT components
53