IBM BladeCenter Copper Pass-thru, Installation Manual

Page: 16 / 56

You can obtain up-to-date information about the copper pass-thru module and
other IBM server products at http://www-947.ibm.com/support/
entry/portal/documentation/.
The product name and serial number are located on the identification label on
the side of the copper pass-thru module. You will need this information when
you register the copper pass-thru module with IBM. See “Major components of
the copper pass-thru module” on page 5 for an illustration that shows the
location of the identification label.
Note: The illustrations in this document might differ slightly from your
hardware.
Related documentation
This Installation Guide contains detailed installation and setup instructions for
the IBM BladeCenter Copper Pass-thru Module. This document also provides
general information about the copper pass-thru module, including information
about features and how to get help.
In addition to this Installation Guide , the following related documentation is
provided with your BladeCenter unit and blade server:
v Rack Installation Instructions
This document contains the instructions to install your BladeCenter unit in a
rack.
v
IBM BladeCenter Installation and User’s Guide
This document is provided in PDF on the IBM BladeCenter unit
Documentation CD. It provides general information about the BladeCenter
unit, including:
– Information about features
– How to set up, cable, and start your BladeCenter unit
– How to install options in your BladeCenter unit
– How to configure your BladeCenter unit
– How to perform basic troubleshooting of your BladeCenter unit
– How to get help
v IBM BladeCenter blade server Installation and User’s Guides
Each type of blade server has a customized Installation and User’s Guide .
These documents are provided in PDF on the IBM BladeCenter unit or
option
Documentation CD. They provide general information about your
blade server, including:
– Information about features
– How to set up and start your blade server
2
IBM BladeCenter Copper Pass-thru Module: Installation Guide