IBM @Server pSeries 630 6C4, Service Manual

Page: 182 / 651

Checkpoint Description Action/
Possible Failing FRU
8009 Set NVRAM configuration in TITAN See note 1 on page 167.
800F Start base code See note 1 on page 167.
8010 Start supervisor in base code See note 1 on page 167.
8012 Initialize hardware interrupts See note 1 on page 167.
8014 Allocate and initialize area in DRAM See note 1 on page 167.
8016 Initialize debugger and build VPD See note 1 on page 167.
8018 Initialize service processor interfaces See note 1 on page 167.
801A Initialize external FLASH load See note 1 on page 167.
801B Initialize and test ISA hub chip See note 1 on page 167.
801C Initialize and test SUPER I/O chip See note 1 on page 167.
801F Initialize diskette, verify VDASD and start
operational loader See note 1 on page 167.
809x Related to recovery mode system firmware
update from diskette See note 3 on page 167.
8092 Diskette initialization during recovery mode
system firmware update See note 3 on page 167.
8098 Firmware image being read during recovery
mode system firmware update See note 3 on page 167.
809C Firmware image being written during
recovery mode system firmware update See note 3 on page 167.
809F Diskette error during recovery mode system
firmware update See note 3 on page 167.
8100 Start operational loader See note 1 on page 167.
81xx Load code into DRAM from VDASD (where
xx = number of loads) See note 1 on page 167.
81FE Load service processor operating system See note 1 on page 167.
81FF Start service processor operating system See note 1 on page 167.
9000 Primary service processor task initializing See note 1 on page 167.
9009 System processor IPL has started See note 1 on page 167.
9010 Primary service processor thread waiting
for response See note 1 on page 167.
9020 Service processor state set to pre-standby See note 1 on page 167.
9021 Service processor state set to standby See note 1 on page 167.
9022 Service processor state set to IPL See note 1 on page 167.
9023 Service processor state set to runtime See note 1 on page 167.
9024 Service processor state set to terminate See note 1 on page 167.
9025 Service processor state set to DPO See note 1 on page 167.
9030 Waiting for secondary thread
acknowledgement See note 1 on page 167.
9033 I/O base initialization See note 1 on page 167.
9034 I2C initialization See note 1 on page 167.
9035 ISA initialization See note 1 on page 167.
9036 Mailbox initialization See note1 on page 167.
162
Eserver
pSeries 630 Model 6C4 and Model 6E4 Service Guide