IBM @Server pSeries 630 6C4, Service Manual

Page: 106 / 651

MAP 1320: Service Focal Point
These procedures define the steps to take when servicing a machine that is equipped with Service Focal
Point (SFP). You might also be directed to these procedures if the system is running Linux as its only
operating system.
Note: If the system is attached to an HMC and Service Focal Point is enabled, the various codes that
might display on the HMC are all listed as error codes by Service Focal Point (SFP). To assist you
in identifying the types of error data in this guide, use the following table.
Number of Digits in Error Code Error code Name Used in this Service Guide
Any Contains # (pound sign) Menu Goal
Any Contains - (hyphen) SRN
5 Does not contain # or - SRN
6 Does not contain # or - Error Code
8 Does not contain # or - Error Code, Service Reference Code
(SRC)
For steps to be taken when beginning service on a machine with SFP, see the “MAP 1321: Quick Entry
MAP for Systems with Service Focal Point” on page 87.
For steps to be taken after service is complete on a machine with SFP, see the “MAP 1322: End of Call
MAP for Systems with Service Focal Point” on page 100.
86
Eserver
pSeries 630 Model 6C4 and Model 6E4 Service Guide