IBM AS/400e, User Handbook Manual

Page: 159 / 834

AS/400e server 270
129
AS/400e server 270
• When a device has a single address defined with shared sessions, that device counts
as one of the maximum active addresses and up to four of the maximum shared
sessions.
There is a maximum of 300 shared sessions per IOP.
The following table indicates the types of sessions that count toward the maximum number of
active sessions.
System Console
The system console specify code determines whether a 5250-type device (twinaxial) or a PC
(Operations Console) is to be used as a console. The choices are as follows:
• #5540 System Console on Twinaxial Workstation Controller
– #4746 PCI Twinaxial IOA
– #9771 Base PCI 2-Line WAN with Modem
• #5544 System Console on Operations Console (default)
– #0367 Operations Console Cable
– #4745 PCI Two Line WAN IOA
– #9771 Base PCI 2-Line WAN with Modem
Counted Description
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
Local display sessions
Remote display sessions
Sessions over 5x94 Controllers (including PCs emulating 5250s)
Network Routing Facility (NRF) or SPLS displays
Distributed Host Command Facility (DHCF) displays
5250 emulation
Twinaxial shared session devices (separate display devices)
Client Access using 5x94 (Virtual displays)
Client Access (APPC devices and VRT displays)
Retail/Finance devices
SNA passthru
TDLC (5150 type devices)
Port sharing (ASCII) (5150 type device)
TCP/IP (TELENET session) (virtual display)
APPC (LU 6.2) sessions (APPC or host devices)
Display Station Passthru/5250 Passthru/ Workstation
Function (virtual displays)
3270 Emulation over host CDs (Host devices)
Apple devices attached to a LocalTalk Workstation Controller
Wireless devices attached to a Wireless LAN Adapter
Twinaxial printers