Netcool/Proviso Adva Optical Metro Ethernet 2.1.1.0 Technology Pack User’s Guide, Version 4.3-X
195
Appendix A: Configuration
This appendix explains how to configure the Adva Optical Metro Ethernet Technology Pack and consists of the
following topics:
Overview
The Adva Optical Metro Ethernet Technology Pack is a MIB-based, SNMP pack, and its configuration is
relatively straightforward.
Before You Begin
Before configuring the Adva Optical Metro Ethernet Technology Pack, ensure that you:
•
Have the following software and documentation (corresponding to your version of Netcool/Proviso):
— The release notes for the current technology pack release.
— The
Netcool/Proviso Installation Guide
.
— The
Netcool/Proviso Upgrade Guide
(if performing an upgrade).
— The
Netcool/Proviso DataMart Configuration Guide
.
Important:
You will need to refer to this guide in order to create an inventory profile and initiate a discovery.
— Access to the Netcool/Proviso DataMart server.
— An X Window server on the DataMart server.
Note:
(Pre-443 Netcool/Proviso) If there is no graphics card on the DataMart server, you can install the Xvfb
virtual frame buffer package to provide X Window services, as described in the
Netcool/Proviso Installation
Guide
.
Topic Page
Overview
195
Before You Begin
195
Configure the Technology Pack
196
Other Tasks and Considerations
198
Summary of Contents for Adva Optical Metro Ethernet 2.1.1.0 Technology Pack
Page 4: ......
