IBM Accesser 4105, Appliance Manual

Page: 45 / 66

Chapter 5. Appliance physical interface
The physical interface for the appliance consists of buttons and LEDs on the front panel and ports and
LEDs on the back panel.
Front control panel
The power status and the hard disk and network activity of the appliance can be read from its front
control panel, as shown in the following figure.
Table 57. Legend for front panel buttons and LEDs
Number Description
1 System health LED
2 Disk activity LED
3 Network link activity LED
4 Unit identification button/LED
5 Power button/LED
6 Non-maskable interrupt (NMI) button
7 Unused
8 Individual disk activity LED (green)
9 Individual disk status LED (blue/amber)
10 Disk drive 0
11 Disk drive 1
12 Unused
13 Unused
14 Unused
15 Unused
16 Unused
17 Unused
18 Asset tag (a pullout mylar tag for customer use)
Figure 13. Front panel buttons and LEDs for the appliance
© Copyright IBM Corp. 2016, 2019
27