IBM 9306 001, Hardware Maintenance Manual, Page: 75 / 122

key. The Scan Pattern Setup menu appears with the
first port position or server name highlighted. The
following example screen displays when the port
order mode is selected.
à ð
Scan Pattern Setup
Port/Sec
Name
6/2ð
Downtown
5/2ð
Sales-A
4/1ð
Sales-B
1/1ð
Match
F2 for defaults
á ñ
If Name order was selected, the Port and Name
columns will be reversed.
4. Using the keyboard keys, select the port number of
the first server to be included in the scan. Note that
the server name, if any is assigned, appears in the far
right column on the menu.
5. Press the Tab key or Right Arrow (
→
) key to move
the highlighting to the Sec column. Then, use the
keyboard keys to enter a time value, in seconds, for
the length of time you want this server to be
connected to the monitor and keyboard, before
switching to the next server in the scan.
6. Press the Down Arrow (
↓
) key to move the
highlighting to the next port in the Port column and
repeat step 5.
To delete unwanted ports from the scan list in the
Scan Pattern Setup window, place the highlighting on
the top-most port to be removed and press the Delete
key (not the Del key on the numeric keypad).
7. When you have finished setting the scan pattern,
press the Enter key. Press Esc at any time before
pressing Enter to retain the previous scan pattern.
Note
Pressing the F2 key will return all Port and Sec
values to the factory defaults.
8. To exit, press Esc
Assigning Unique Names to Servers:
Unique
names can be given to servers and secondary selector
switches. To assign names:
1. Press the Print Screen key
2. Press the F2 key to display the Advanced Menu
Type 9306 Model 900
67