manualshive.com logo in svg

IBM 9009-41G, Manual, Page: 24 / 36

Share
Download
IBM 9009-41G Manual Download Page 24

• Two expanded function GXP PCIe3 x8 Cache SAS RAID Internal adapters 6 Gb, with RAID 0, 5, 6, 10,

5T2, 6T2, and 10T2

• One RDX device
• One 4U 12 Gb disk drive backplane which supports 12x SFF (2.5") bays
• Two mini 8x SAS HD cables
or
• Two expanded function GXP PCIe3 x8 Cache SAS RAID Internal adapters 6 Gb, with RAID 0, 5, 6, 10,

5T2, 6T2, and 10T2

• One 4U 12 Gb disk drive backplane which supports 18x SFF (2.5") bays
• Two mini 8x SAS HD cables
Two external SAS 4x ports are supported with the expanded function storage configuration. The SAS port

connectors are located on the rear bulk head. The external SAS ports are used for expansion to external

SAS storage drawers.

SAS subsystem service considerations

There are several considerations to review before servicing features within the SAS subsystem for the

5105-22E, 9008-22L, 9009-22A, 9009-22G, 9009-41A, 9009-41G, 9009-42A, 9009-42G, 9223-22H,

9223-22S, 9223-42H, or 9223-42S system.
Before servicing any features, review the I/O configurations for each logical partition on your system. It is

important to understand the differences between the various configurations and the resulting service

considerations. In addition, consider possible impacts to the following areas:
• Logical partitions and their I/O adapter assignments
• RAID array configurations
• Physical disk locations
• Path to your boot device
Related information
Logical partitioning
SAS RAID controllers for IBM i
SAS RAID controllers for Linux
SAS RAID controllers for AIX

Problem determination and recovery

Review information about using problem determination and recovery procedures for the 5105-22E,

9008-22L, 9009-22A, 9009-22G, 9009-41A, 9009-41G, 9009-42A, 9009-42G, 9223-22H, 9223-22S,

9223-42H, or 9223-42S system.

Attention: To maintain system availability and to prevent possible data loss, contact your next

level of support for any service that is related to the SAS storage subsystem on the 5105-22E,

9008-22L, 9009-22A, 9009-22G, 9009-41A, 9009-41G, 9009-42A, 9009-42G, 9223-22H,

9223-22S, 9223-42H, or 9223-42S system.

Related information
SAS RAID controllers for AIX
SAS RAID controllers for IBM i
SAS RAID controllers for Linux
Serial-attached SCSI cable planning

10  Power Systems: SAS subsystem

Summary of Contents for 9009-41G





































Reviews:

No comments