IBM 8335-GTG Handbook Download Page 39

Page: 39 / 70

Finding parts and locations

Locate physical part locations and identify parts with system diagrams.

Locate the FRU
Use the graphics and tables to locate the field-replaceable unit (FRU) and identify the FRU part number.

8335-GTC, 8335-GTG, 8335-GTH, 8335-GTW, or 8335-GTX locations

Use this information to find the location of a field-replaceable unit (FRU) in the system unit.
Note: The numbers for all of the FRU descriptions begin with 0 except for PCIe adapters, which begin with

Rack views
The following diagrams show field-replaceable unit (FRU) layouts in the system. Use these diagrams with

the following tables.

Rear view

Figure 1. Front view

Table 12. Front view locations
Index number

FRU description

FRU removal and replacement

procedures

Fan 0

See Removing and replacing fans

in the 8335-GTC, 8335-GTG, or

8335-GTH or Removing and

replacing fans in the 8335-GTW

or 8335-GTX.

Fan 1
Note: 8335-GTW and 8335-GTX

systems do not support this

location.

Fan 2

Fan 3

HDD 0

See Removing and replacing a

disk drive in the 8335-GTC,

8335-GTG, 8335-GTH, 8335-

GTW, or 8335-GTX.

HDD 1

Summary of Contents for 8335-GTG







































































Search results

Summary of Contents for 8335-GTG

Reviews:

Related manuals for 8335-GTG

Brands by name

Popular brands

IBM 8335-GTG, Handbook

Search results

Summary of Contents for 8335-GTG

Reviews:

Related manuals for 8335-GTG

Brands by name

Popular brands