IBM 8335-GTG Handbook Download Page 38 | Manualshive

Page: 38 / 70

background image

a) Log in as root user.

b) At the command prompt, type

sosreport

and press Enter.

c) You are prompted for additional information. When the command is complete, the location of the

output file is displayed. Note the location of the output file. Then, continue with the next step.

3. To collect system event logs, type the following command and press Enter:

openbmctool -U <username> -P <password> -H <BMC IP address or BMC host name>

collect_service_data

4. Send the data that you collected during this procedure to IBM service and support. This ends the

procedure.

Contacting IBM service and support

You can contact IBM service and support by telephone or through the IBM Support Portal.
Before you contact IBM service and support, go to “Beginning troubleshooting and problem analysis” on

page 1 and complete all of the service actions indicated. If the service actions do not resolve the problem,

or if you are directed to contact support, go to “Collecting diagnostic data” on page 23. Then, use the

information below to contact IBM service and support.
Customers in the United States, United States territories, or Canada can place a hardware service request

online. To place a hardware service request online, go to the IBM Support Portal (http://www.ibm.com/

support/entry/portal/product/power/scale-out_lc).
For up-to-date telephone contact information, go to the Directory of worldwide contacts website

(www.ibm.com/planetwide/).

Table 11. Service and support contacts
Type of problem

Call

• Advice
• Migrating
• "How to"
• Operating
• Configuring
• Ordering
• Performance
• General information

• 1-800-IBM-CALL (1–800–426–2255)
• 1-800-IBM-4YOU (1–800–426–4968)

Software:
• Fix information
• Operating system problem
• IBM application program
• Loop, hang, or message
Hardware:
• IBM system hardware broken
• Hardware reference code
• IBM input/output (I/O) problem
• Upgrade

1-800-IBM-SERV (1–800–426–7378)

24 Power Systems: Problem analysis, system parts, and locations for the 8335-GTC, 8335-GTG, 8335-GTH,

8335-GTW, and 8335-GTX

«
...
36
37
38
39
40
...
»

Summary of Contents for 8335-GTG







































































Reviews:

No comments

Related manuals for 8335-GTG

Brand: IBM Pages: 7

Brand: Fein Pages: 30

Brand: Fein Pages: 61

Brand: Federal Signal Corporation Pages: 12

Brand: JAMEC PEM Pages: 4

Brand: Parkside Pages: 78

Brand: QTORQ Pages: 4

Brand: K-BUS Pages: 35

Brand: Makita Pages: 16

Brand: Wacker Neuson Pages: 32

Brand: Fein Pages: 125

Greenlee INLNPRESS-TOOL19kN

Brand: Textron Pages: 12

Brand: Ryobi Pages: 13

Brand: Sanela Pages: 2

Craftsman 113.213850

Brand: Sears Pages: 24

Brand: Zenit Pages: 8

Brand: phytron Pages: 29

Carlyle Tools 6-711A

Brand: Napa Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands