IBM 8275, User Manual

Page: 54 / 110

You must supply this information:
IP Address:
The IP address of the target station. The value is 4 decimal bytes ranging
from 0 to 255. The default is 0.0.0.0.
Ping Count:
You can select one of these values; the default value is single:
v
Single — one ping is sent to target station.
v
Multiple — three pings are sent to the target station.
v
Continuous — a ping is sent every second.
Command:
Send is the only command. To stop sending pings, press F3 (PREV MENU)
or select the Main Menu when sending continuous pings.
ARP Cache
Select Management Menu from the Main Menu. Then, select ARP Cache Menu
from the Management Menu to displays the ARP cache for the 8275-416 .
This is used to check connectivity between the 8275-416 and other devices. The
ARP cache identifies the MAC address of the IP stations communicating with the
8275-416 . SeeFigure 27 on page 41 for ARP Cache information.
Figure 26. Ping
40
8275-416 User’s Guide