IBM 8275-416, User Manual

Page: 84 / 156

Number of active host entries
Current number of hosts (IP addresses) identified by the Self Learning IP
function since it was last enabled. This is the same value that is displayed
on the Switch Detailed Statistics Menu.
IP Address of Host to Display
You specify the IP address of the host for which you want to view
information.
Host MAC Address
MAC address associated with the host’s IP address.
Host Unit.Slot.Port
Unit, slot, and port number for this host. If the port is part a trunk, then this
line is labeled “Trunk ifIndex” and the value is the ifIndex for this trunk.
Host Packets Switched
The number of IP packets destined for this host’s IP address that were
switched directly to this host address, bypassing the router, since the host
was last learned by the self-learning IP function.
Router (Gateway) IP Address
The IP address of the router to which this host communicates when
sending IP traffic to a different subnet (as viewed by the self-learning IP
function).
Router (Gateway) MAC Address
The MAC address of the router to which this host communicates when
sending IP traffic to a different subnet (as viewed by the self-leaning IP
function).
Notes:
1. When the panel is first displayed, the lines for the Host MAC Address, Router
MAC Address, Host Unit.Slot.Port, and Host Packets Switched are blank. After
the IP Address is entered and Apply is selected, these lines appear.
2. If the specified Host IP address is not found, the message “Information for <IP
address> is not available” where <IP address> is the value that was entered for
“IP Address of Host to Display”.
Figure 54. Self Learning IP host address menu
68
8275-416 User’s Guide