IBM 7199-92X, Installation And User Manual

Page: 46 / 82

v
If the LED is illuminated in amber, the connection speed is 10 or 100 Mbps
G The activity LED for the
MGT0
and
MGT1
Ethernet connections indicates that
traffic is passing through the interface.
v
If the green LED is illuminated, the Ethernet port is linking to the
interface.
v
If the green LED is illuminated and blinking, the Ethernet port is active.
H The LEDs on the 8-port Ethernet module indicate the speed of the
connection.
v
If these LEDs are illuminated in green, the connection speed is 1 Gbps.
v
If these LEDs are illuminated in amber, the connection speed is 100 Mbps.
I
The LEDs on the 8-port Ethernet module specify the port activity.
v
If these LEDs are illuminated, the Ethernet port is linking to the interface.
v
If these LEDs are illuminated and blinking, the interface is active.
J If the green LED on the 10 Gb SFP+ module is illuminated, the Ethernet port
is active and linking to the interface.
K The LEDs on the 10 Gb SFP+ module LED indicate the speed of the port.
v If these LEDs are illuminated in green, the connection speed is 10 Gbps.
v
If these LEDs are illuminated in amber, the connection speed is 1 Gbps.
L The amber LED light for the cache indicates possible error conditions with
the cache.
v
If illuminated at the same time as the green LED (light N in the diagram),
the power is on but the driver is not loaded.
v
If illuminated at the same time as the yellow and green LED lights (lights
M and N in the diagram), a firmware update might be in progress.
M The yellow LED light for the cache indicates when data is being written to
the cache.
v
If flashing, data is being written to the cache. The flashing indicates the
write volume. Can occur in combination with the green LED (labeled as N
in the diagram).
v If illuminated at the same time as the amber and green LED lights (lights L
and N in the diagram), a firmware update might be in progress.
N
The green LED light for the cache indicates when data is being read from the
cache.
v
If flashing, data is being read from the cache. The flashing indicates the
read volume.
v
If illuminated at the same time as the amber LED (light L in the diagram),
the power is on but the driver is not loaded.
v If illuminated at the same time as the amber and yellow LED lights (lights
L and M in the diagram), a firmware update might be in progress.
7199 rear panel
Figure 13 on page 29 shows the LEDs on the rear of the Type 7199 appliance.
28
WebSphere DataPower XC10 Appliance: Type 7199-92X: Installation and User's Guide