IBM 7199-92X, Installation And User Manual

Page: 26 / 82

Note: When you press the power button to turn off the appliance, there is still
electrical current flowing to the device. To completely stop all electricity to
the appliance, unplug all power cords.
Ethernet network configuration
The Ethernet modules expand the network connectivity options. Each appliance
has two Ethernet modules. The Ethernet modules are numbered from left to right,
but if a module has less than eight ports, the module will use the lowest port
number in the range.
Numbering convention
The numbering convention for configuring Ethernet interfaces and installing
network cables is:
v
Left module ranges from
ETH0
to
ETH7
v
Right module ranges from
ETH8
to
ETH9
Type 7199 connections
Each Ethernet module has one of the following configurations:
v The left Ethernet module has eight 1 Gigabit Ethernet ports, which are RJ45
connectors.
v
The right Ethernet module has two 10 Gigabit Ethernet ports, which are small
form-factor pluggable (SFP+) transceivers.
The appliance has ten Ethernet connections. The Ethernet interface names are
ETH0
through
ETH7
,
ETH8
, and
ETH9
.
Figure 5. 8x2 Ethernet connection
8
WebSphere DataPower XC10 Appliance: Type 7199-92X: Installation and User's Guide