IBM 7199-92X, Installation And User Manual

Page: 21 / 82

M
MGT1
Ethernet connector
N
Left Ethernet modules:
v
eth0
v
eth1
v
eth2
v eth3
v
eth4
v eth5
v
eth6
v
eth7
O
Right Ethernet modules:
v
eth8
v
eth9
P
The amber, or error LED indicator light for the cache.
Q
The yellow, or writing LED indicator light for the cache.
R
The green, or reading LED indicator light for the cache.
LCD module
The front panel of the appliance has a liquid crystal display (LCD) module that
includes an LCD and five menu buttons. The LCD provides information about the
model type and build number of the appliance; however, the menu buttons are not
functional.
Console connector
The front panel of all Type 7199 appliance has a console connector. For initial
configuration, use the RJ45 (IS0 8877) to DB-9 (also known as a DE-9 or
EIA/TIA-562) serial null-modem cable that is shipped with the appliance to
connect from an ASCII terminal
1
or to connect from a PC that is running terminal
emulation software to the appliance. There is a RJ45 connection on one end of the
cable, and a DB-9 serial null-modem connection on the other end of the cable. The
RJ45 end connects to the appliance and the DB-9 serial null-modem cable end
connects to your ASCII terminal or personal computer. Use the USB-to-serial
converter cable to attach the cable to your personal computer.
Note: For initial configuration, you can use the RJ45 to serial connection cable that
ships with the appliance or you can create a cable based on the cable pinout
specifications listed in the following table. Do not use an Ethernet cable to
plug the serial console port into an Ethernet network.
1. A simple device that transmits (inputs) and receives (outputs) ASCII data.
Figure 2. LCD module
Chapter 1. Introducing the IBM WebSphere DataPower XC10 Appliance
3