IBM 7163, Problem Determination And Service Manual

Page: 56 / 210

Connecting the cables
You must turn off the server before you connect any cables to or disconnect any
cables from the server.
See the documentation that comes with optional devices for additional cabling
instructions. It might be easier for you to route cables before you install certain
devices.
For details about the locations and functions of the input/output connectors, see
“Server controls, connectors, LEDs, and power” on page 4.
The following illustrations show the locations of the input/output connectors.
Detailed cabling instructions for installing the server in a rack are in the
Rack
Installation Instructions that come with the server.
Rear view
SP Ethernet
10/100
Serial
Mouse
Keyboard USB
Gigabit
Ethernet 1
Gigabit
Ethernet 2
Video
Power supply
Front view
Power-control button
Power-on LED
USB connectors
Hard disk drive activity LED
Information LED
System-error LED
Locator LED
Release latch
40
IBM System x3755 Type 8877 and 7163: Problem Determination and Service Guide