IBM 7163, Problem Determination And Service Manual

Page: 30 / 210

ServerGuide Setup and Installation CD did not come with the server, you can
download the latest version from http://www.ibm.com/pc/qtechinfo/MIGR-
4ZKPPT.html.
To start the ServerGuide Setup and Installation CD, complete the following steps:
1. Insert the CD, and restart the server. If the server does not start, see
“ServerGuide problems” on page 109.
2. Follow the instructions on the screen to:
a. Select your language.
b. Select your keyboard layout and country.
c. View the overview to learn about ServerGuide features.
d. View the readme file to review installation tips about your operating system
and adapter.
e. Start the setup and hardware configuration programs.
f. Start the operating-system installation. You will need your operating-system
CD.
Using the Update Xpress program
The Update Xpress program is available for most IBM System x and xSeries servers
and server options. It detects supported and installed device drivers and firmware in
the server and installs available updates. You can download the Update
Xpress
program from the Web at no additional cost, or you can purchase it on a CD. To
download the program or purchase the CD, go to http://www.ibm.com/servers/
eserver/xseries/systems_management/ibm_director/
extensions/xpress.html. Additional information about Update
Xpress is available from
the System x and xSeries Tools Center at http://publib.boulder.ibm.com/infocenter/
toolsctr/v1r0/index.jsp.
Using the Configuration/Setup Utility program
Use the Configuration/Setup Utility program to perform the following tasks:
v
View configuration information
v View and change assignments for devices and I/O ports
v
Set the date and time
v Set and change the power-on password
v
Set the startup characteristics of the server and the order of startup devices
v Set and change settings for advanced hardware features
v
View and clear error logs
v
Change interrupt request (IRQ) settings
v
Enable USB legacy keyboard and mouse support
v
Resolve configuration conflicts
Starting the Configuration/Setup Utility program
To start the Configuration/Setup Utility program, complete the following steps:
1. Turn on the server.
2. When the prompt Press F1 for Configuration/Setup appears, press F1. If you
have set both a power-on password and an administrator password, you must
type the administrator password to access the full Configuration/Setup Utility
menu. If you do not type the administrator password, a limited
Configuration/Setup Utility menu is available.
3. Select settings to view or change.
14
IBM System x3755 Type 8877 and 7163: Problem Determination and Service Guide