7011 POWERstation and POWERserver
®
220, and 230
Dimensions
Desktop
Deskside
Height
84 mm
3.3 in.
432 mm
17.0 in.
Width
¹
406 mm
16.0 in.
216 mm
8.5 in.
Depth
419 mm
16.5 in.
419 mm
16.5 in.
Weight
Minimum
9.0 kg 20 lbs.
Maximum
11.5 kg 25 lbs.
Electrical
Power source loading
0.17
(typical in kVA)
Voltage range (V ac)
100 to 127 or 200 to 240 (autoranging)
Frequency (hertz)
50 or 60
Thermal output
(typical)
340 Btu/hr
Power requirements
(typical)
100 watts
Power factor
0.5 to 0.7
Inrush current
50 amps at 120 V ac, 100 amps at 240 V ac
Maximum altitude
2135 m (7000 ft.)
Temperature
Requirements
Operating
16 to 32°C
(60 to 90°F)
Non-Operating
10 to 43°C
(50 to 110°F)
Humidity
Requirements
Operating
Non-Operating
(Noncondensing)
8 to 80%
8 to 80%
Wet Bulb
23°C (73°F)
27°C (80°F)
Noise Emissions
²
Operating
Idle
L
WAd
5.2 bels
5.0 bels
L
pAm
41 dBA
40 dBA
<L
pA
>
m
39 dBA
38 dBA
Impulsive or
prominent discrete
tones
No
No
Clearances
³
Front
Back
Left
Right
Install/ Air Flow
4,5
35mm(1.5 in)
51mm(2 in)
25mm(1 in)
25mm(1 in)
Service
466mm(18 in)
N/A
N/A
N/A
Footprint
4
Width
Width
Desktop
456mm(18 in)
508mm(20 in)
Deskside
216mm(8.5 in)
508mm(20 in)
1. Deskside width measurement includes the optional vertical stand.
2. See “Noise Emission Notes” on page 336 for definitions of noise emissions positions.
3. Left and right measurements apply only when the system is used in the desktop position.
4. The amount of space needed by the unit during normal operation is indicated by the footprint dimensions.
5. When placed in the vertical position, the Model 220 requires 25 mm (1 in) at the bottom and top for proper air
flow. The necessary bottom clearance is provided by the optional vertical stand.
16
Site and Hardware Planning Information
Summary of Contents for 7012 397
