background image

Chapter 1. General description 

3

For the rack-mounted Model 6C1, we recommend that you use the 7316-TF1 Flat Panel 
Console in combination with the appropriate console switch to manage several systems in a 
rack.

To help ensure that strategic applications remain available 24 x 7, the Models 6C1 and 6E1 
feature an integrated service processor that constantly monitors the systems' vital signs. In 
the event of a malfunction, the service processor is capable of 

calling home

 by automatically 

dialing out to an IBM service center, often before any problem is apparent to users or system 
administrators.

The Models 6C1 and 6E1 are the first IBM UNIX servers that contain built-in Light Path 
Diagnostics. This technology provides LEDs physically located on key system components, 
assisting in quick diagnosis and resolution of problems, should they arise. Please refer to 
“Light Path diagnostics” on page 23 to get detailed information.

1.2  Physical package

Figure 1-1 on page 3 shows the package layout for the Model 6C1, and Figure 1-2 on page 4 
shows the same for the Model 6E1.

Figure 1-1   pSeries 610 Model 6C1 - package layout

The Model 6C1 is a 5U (EIA)

1

 19 inch rack-mounted system and has a size of 426 mm W x 

617 mm D x 215 mm H (16.8 inches W x 24.0 inches D x 8.5 inches). The Model 6E1 is a 
tower package. Its size without option accessories is 215 mm W x 617 mm D x 426 mm H (8.5 
inches W x 24.0 inches D x 16.8 inches H). Both systems have a maximum weight of 43.1 kg 
(94.8 pounds).

The system comes preconfigured with the features the customer ordered. Any devices in the 
media bays are connected to the internal Ultra3 SCSI controller (depending on the 
configuration selected, additional cables may be required to complete an order, see 2.5.1, 
“Internal storage attachments” on page 16 for more information).

To connect external SCSI devices to the external Ultra3 SCSI adapter’s VHDCI

2

, make sure 

you have the proper connecter for the VHDCI port. If not, order feature code # 2118 (mini-68 
pin VHDCI to 68 pin). This 0.3 m long cable (P/N 76H0518) is not included with the minimum 
system configuration.

1  

One EIA (Electronic Industries Association Unit) is 44.45 mm (1.75”).

2  

Very High Density Cable Interconnect (VHDCI)

Summary of Contents for 6C1











































Reviews: