IBM 68Y7493, Installation Manual

Page: 31 / 58

CAUTION:
Hazardous energy is present when the blade server is connected to the power
source. Always replace the blade cover before installing the blade server.
Installing the expansion blade cover
The following instructions and illustration show how to install the expansion blade
cover.
Cover
Cover
release
Cover
release
To install the expansion blade cover, complete the following steps:
1. Read the Safety information beginning on page “Safety” on page v and
“Installation guidelines” on page 7.
2. Orient the cover over the expansion blade.
3. Lower the cover so that the slots at the rear slide down onto the pins at the
rear of the expansion blade.
4. Pivot the cover closed and press it firmly into place until the cover-release
latches click.
Statement 21:
Chapter 3. Installing options
15