IBM 6400i, Setup Manual

Page: 97 / 370

Entering Program Mode
97
Loading Custom Sets Or Factory Default Values
You can load any of the custom set configurations or the factory default
configuration. Factory default parameters are shown starting on page 87. The
loaded configuration remains active as long as the printer is on. The following
procedure shows how to load factory defaults to the printer.
If you power off the printer, the power-on configuration will load the next time
the printer is powered on. Selecting the power-on configuration is explained
on page 99.
Configuration
Management
Recall
Custom Set
Factory Default*
Custom Set 1
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preloaded Set 5
Custom/Preloaded Set 6
Custom/Preloaded Set 7
Custom/Preloaded Set 8
Protect
Custom Sets
Change
Power On Set
Delete
Custom Set
Save Current
Values
* = Factory Default
Print Custom
Set Values
Name
Custom Sets
Reset
Custom Set
Names
Loading Custom Sets Or Factory Default Values