IBM 6400i, Setup Manual

Page: 245 / 370

Print Format Menu
245
RibbonMinder Menu
New Ribbon
This provides a means to manually set the printer when a new ribbon has
been installed. The ribbon life displayed on the control panel (if active) sets to
100%. The count internal to the printer also resets, and the tabulation towards
end of ribbon life begins.
Ribbon Action
•
Disable (the default). When Disable mode is selected, the ribbon life
display is removed from the control panel, but the Ribbon Minder
continues to monitor ink consumption. No indication (no flashing light, or
warning beep) is given, and the printer continues to accept new print jobs
indefinitely.
RibbonMinder
(from page 104)
New Ribbon
XXX%
Ribbon
Action
Ribbon
Type
To view options, press:
To select an option, press:
To exit the configuration menus
and return to READY, press:
Scroll Scroll Enter Return
Enter
Start
* = Factory Default
Ribbon End
Point
New Ribbon
Detect
Press the ENTER
key to reset ribbon
life to 100%. Disable*
Display
Fault Immediate
Fault Paper Out 6400-I Premium 30 Ribbon*
6400-I Premium 20
6400-I Premium 2000 Normal*
Reduce 5% - 100%
Extend 5% - 100% Disable*
Enable
RibbonMinder Menu