IBM 6400-i05, Setup Manual

Page: 229 / 370

P-Series XQ Emulation Menu
229
Define CR Code (Carriage Return)
This option controls the action of the printer when it receives a Carriage
Return code (hex 0D) from the host computer. If this feature is enabled, each
time the printer receives a Carriage Return, it inserts an additional Line Feed
code (hex 0A) into the data stream. Do not use this feature if the host
computer sends line feeds to the printer.
•
CR = CR (the default). Does not insert an extra line feed after each
carriage return.
•
CR = CR + LF. Inserts an extra line feed after each carriage return. The
next print position will be print position 1 of the next line.
Auto LF
This option defines the printer action when print data is received past the
forms width setting.
•
Disable (the default). Discards any data past the forms width.
•
Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
Define LF Code (Line Feed)
•
LF = CR + LF (the default). Forces an automatic carriage return with each
line feed command received. The next print position is print position 1 of
the next line.
•
LF = LF. Does not perform an automatic carriage return when a line feed
command is received. The next print position will be the current print
position of the next line.
Compressed Print
Controls which host command sets compressed printing.
•
Char 01 SOH (the default)
•
Char 03 ETX
•
Char 09 HT
Elong/Alt. Font
Controls which host command sets elongated (double high) fonts and
extended character set.
•
Elng=BS Font=SO (the default)
•
Elng=SO Font=BS
High Speed Print Mode
Controls which host command sets high speed printing.
•
Char 02 STX (the default)
•
Char 03 ETX
•
Char 09 HT