IBM 6400-i05, Setup Manual

Page: 211 / 370

Code V Emulation Menu
211
SFCC and Power On
Select SFCC
Selects the Special Function Control Character. Valid values are 11 (hex)
through FF (hex). The default value is 5E (hex). Always use the SFCC
required for your configuration wherever the circumflex, or (cc) is shown.
Obtain a configuration printout to determine the currently selected SFCC.
Power On ^X
Selects the ignore mode power up condition. Refer to the 6400 Code V
Programmer’s Reference Manual for more information.
•
Disable (the default). Does not select the ignore mode as the power-up
default.
•
Enable. Selects the ignore mode as the power-up default, and selects the
graphics mode (cc)PY as the power-up default. All characters are ignored
until a (cc)A command is received.
Graphics
Options
(from page 210)
Absorb at ^PY
Ignore Dots
Value
Append
Rotated Truncate Off
Page Alpha
True Vertical
1/10
Slashed Zero
Disable*
Enable
Disable*
Enable Disable*
Enable Disable*
Enable Disable*
Enable
Absorb Motion*
Disable
Absorb All
UPC
Descenders
Enable*
Disable
Rotate
Character Size
Adjusted*
Not Adjusted
Ignore
Spaces
Disable*
Enable
Midline PY
Enable*
Disable
Dark
Barcode
Disable*
Enable
Expanded
Font
Block*
Scalable
LP+ Font
Disable*
Enable
Width Limit
Disable*
Enable
Absorb at ^PN
Disable*
Enable
IGP110
Compatibility
Enable*
Disable
Inline
Graphics
Disable*
Enable