IBM 6000 VA LCD 4U, Installation And Maintenance Manual

Page: 19 / 88

Chapter 2. Installing the uninterruptible power supply
This chapter describes the following tasks:
v Checking the package contents
v
Front and rear views of the uninterruptible power supply (UPS) and extended
battery module
v Connecting the extended battery module to the UPS
v
Installing a remote emergency power-off connector
v Hard-wiring the UPS input (for licensed electrician only)
v
UPS initial startup
You will need the following tools to install the UPS:
v
One number 2 Phillips screwdriver (for use with the rack mount kit and terminal
block cover)
v One flat-blade screwdriver (for wiring the terminal block)
Inventory checklist
The UPS comes with the following items.
Note: Your UPS model might not come with all of the items in the following list.
v UPS
v
Two bezels (upper and lower)
v
Rack mount kit, including rails and mounting hardware
v Documentation package
v
IBM UPS Manager CD (power-management software)
v Serial and USB communication cables
v
Remote emergency power-off connector
Front view of the UPS
The following illustration shows the front view of the UPS.
© Copyright IBM Corp. 2010, 2012
5