manualshive.com logo in svg

IBM 6.1.8.2, Hardware Planning And Installation Manual, Page: 11 / 114

Share
Download
IBM 6.1.8.2 Hardware Planning And Installation Manual Download Page 11

About this information

Who should read this information

This information is intended for administrators of IBM Elastic Storage

®

 System (ESS) that includes IBM

Storage Scale RAID.

IBM Elastic Storage System information units

IBM Storage Scale System Utility Node documentation consists of the following information units.

Information unit

Type of information

Intended users

Hardware Planning

and Installation

Guide

This unit provides IBM Storage Scale System

Utility Node information including technical

overview, planning, installing, troubleshooting,

and cabling.

System administrators and IBM

support team

Quick Deployment

Guide

This unit provides ESS information including the

software stack, deploying, upgrading, setting up

call home, and best practices.

System administrators,

analysts, installers, planners,

and programmers of IBM

Storage Scale clusters who

are very experienced with the

operating systems on which

each IBM Storage Scale cluster

is based

Service Guide

This unit provides IBM Storage Scale System

Utility Node information including servicing and

parts listings.

System administrators and IBM

support team

Problem

Determination Guide

This unit provides ESS information including

events, replacing servers, issues, maintenance

procedures, and troubleshooting.

System administrators and IBM

support team

Command Reference This unit provides information about ESS

commands and scripts.

System administrators and IBM

support team

IBM Storage

Scale RAID:

Administration

This unit provides IBM Storage Scale RAID

information including administering, monitoring,

commands, and scripts.

• System administrators of IBM

Storage Scale systems

• Application programmers

who are experienced with

IBM Storage Scale systems

and familiar with the

terminology and concepts in

the XDSM standard

IBM Elastic Storage System (ESS) 3200 documentation consists of the following information units.

Information unit

Type of information

Intended users

Hardware Planning

and Installation

Guide

This unit provides ESS 3200 information

including technical overview, planning,

installing, troubleshooting, and cabling.

System administrators and IBM

support team

©

 Copyright IBM Corp. 2022, 2023

xi

Summary of Contents for 6.1.8.2



















































































































Reviews:

No comments