manualshive.com logo in svg

IBM 55F, Maintenance Information, Page: 232 / 362

Share
Download
IBM 55F Maintenance Information Download Page 232

The flash dump icon   appears when a dump is stored in flash memory. If you do not need the flash

dump information, you can clear the dump by using this procedure.

1. From the service panel, press Change Mode .
2. Select CE Offline Mode, then Dump.
3. From the CE Dump menu, select Clear Flash Dump. The CE Wait menu appears momentarily while

the dump is cleared.

4. Select Cancel to return to the CE Dump menu.
5. Return to the procedure that sent you here.

Offloading Dumps to System i (OS/400)

Use “Offloading dumps to tape cartridge” on page 216.

Offloading dumps to AIX with TAPEUTIL

Refer to the IBM SCSI Tape Drive, Medium Changer, and Library Device Drivers: Installation and User's

Guide for details of the ITDT/tapeutil program with AIX systems.

The dump icon 

 appears when the dump is available. It remains on the screen to indicate that trace

data is stored in the device.
Note: Trace data is volatile and is lost if you press Reset or power OFF the device.
You might require assistance from the customer during this process.
This procedure reads a dump from the 3592 and writes it to a diskette in AIX/UNIX format.

1. At the drive service panel, verify that the drive is Online.
2. Verify that the drive is unloaded.
3. Verify that the drive is not in use by another host.
4. Insert the diskette that is used for the dump into the system floppy diskette drive.
5. When the prompt appears, format the diskette by typing 

format

, and pressing Enter.

6. Start the tape utility program by typing

tapeutil

 at the prompt.

7. Select Tape Drive Service Aids option from the menu, and press Enter.
8. Select Read Dump from the following panel, and press Enter.

IBM Tape Device Service Aid Menu                              700000

 

 

 Select One of the Service Aids to be performed

 

  Force Microcode Dump

    Perform a microcode dump of the system. The dump is stored in

    the device.

    After the dump is performed it must be read using Read Dump.

  Read Dump

    Transfer a dump from the tape device to a host file, diskette or

    a tape cartridge.

  Microcode load

    Download microcode from host file or diskette to tape device via

    SCSI bus.

  Error Log Analysis

    Analyze system error log for device.

F3=Cancel                            F10=Exit

9. Select a Device, and press F7=Commit from the following panel. You must press F7=Commit after

the drive is selected.

212  IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information

Summary of Contents for 55F











































































































































































































































































































































































Reviews:

No comments