IBM 4247 Model 003, User Manual

Page: 79 / 392

6. Press Scroll
↑
or Scroll
↓
until the desired custom set value is displayed.
Note: If you have previously created a custom set definition for that letter, that
information will be replaced with the new information when you press
Enter
.
7. Press Enter.
The printer displays a message similar to
Save Current Values
Custom Set A Saved
8.
Use Start or Return to exit the Menu. See “Exiting the Configuration Menu” on
page 55. The display will be updated to show the new custom set that is in use.
See “Custom Set In-Use Indicator” on page 40.
Recall Custom Set Values
The Recall Custom Set values recalls configuration parameters previously stored.
(Custom sets are described in “Custom Sets” on page 67.)
You can recall current values from:
v
Custom Set A
v
Custom Set B
v
Custom Set C
v
Custom Set D
v
Custom Set E
v
Custom Set F
v
Custom Set G
v
Custom Set H
Note: When a new custom set is recalled, a partial reset is automatically
performed when exiting from the configuration menu if the value of at least
one of the parameters that requires a partial reset has been changed.
Buffered data will be lost.
To recall custom set values, follow these steps:
1.
Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Configuration Storage
3. Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
Configuration Storage
Recall Custom Set Values
5. Press Enter to display the current value.
6.
Press Scroll
↑
or Scroll
↓
until the desired custom set value is displayed.
7. Press Enter. The printer displays a message similar to
Recall Custom Set
Custom Set A Recalled
Chapter 4. Configuration Storage
69