IBM 4247 Model 003, User Manual

Page: 172 / 392

Front Paper Load Position
This parameter adjusts the distance of the first printable line to the top of the
paper from −24 to +288 units (2 in.) (where each unit is 0.176 mm [1/144 in.]). The
default value is 0.
To change or check the Front Paper Load Position:
1. Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Printer Adjustments
3. Press Enter.
4.
Press Scroll
↑
or Scroll
↓
until the printer displays
Printer Adjustments
Front Paper Load Position
5. Press Enter to display the current value.
6. Press Scroll
↑
or Scroll
↓
until the desired value for Front Paper Load Position is
displayed.
7. Press Enter.
An asterisk (*) is displayed in front of the selected value.
8. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Rear Automatic Forms Thickness Adjustment (AFTA)
This parameter allows you to adjust the distance between the paper and the
printhead for the rear forms path. Forms must be loaded for this adjustment to be
effective. This adjustment can be set to one of the following values:
-5 to +3
The printer automatically adjusts the distance between the forms and the
printhead. Each adjustment corresponds to 0.03 mm (.0012 in.). (The
default is 0, which corresponds to a gap of 0.25 mm [.01 in.] from the
forms.)
Fixed 1 to 8
Selects a fixed printhead distance value from 1 to 8 in increments of 0.5
(where each value equals approximately 0.05 mm [.002 in.]).
To change or check the Rear AFTA:
1. Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Printer Adjustments
3.
Press Enter.
162
4247 Model 003 User’s Guide