IBM 4247 Model 003, User Manual

Page: 165 / 392

4. Press Scroll
↑
or Scroll
↓
until the printer displays
Printer Setup
Bar Code Print Direction
5. Press Enter to display the current value.
6. Press Scroll
↑
or Scroll
↓
until the desired value for bar code print direction is
displayed.
7. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
8.
Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Graphics Print Direction
You can set the Graphics Print Direction to:
Unidirectional (Default)
Causes the printer to print in only one direction, either from left to right or
from right to left, for each of the two passes of graphics printing on a line.
Bidirectional
Causes the printer to print as the printhead moves in both directions. (This
setting causes faster throughput but may affect print quality. Verify that the
print quality is acceptable before running a print job.)
To change or check the graphics print direction, follow these steps:
1. Press Menu.
2.
Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Printer Setup
3. Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
Printer Setup
Graphics Print Direction
5.
Press Enter to display the current value.
6. Press Scroll
↑
or Scroll
↓
until the desired value for graphics print direction is
displayed.
7. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
8. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Perforation Safety
You can set perforation safety to either of the following values:
Disabled (Default)
The printhead is not parked all the way to the right of the print line while
the perforation of the form is passing through the mylar opening.
Chapter 10. Printer Setup
155