IBM 4247 Model 003, User Manual

Page: 145 / 392

10. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Parallel Interface
Interface Type
This parameter allows you to set the system interface for the parallel attachment.
You can set Interface Type to either of the following values:
v
PC Parallel (Default)
v
1284 Parallel
To change or check the Interface Type:
1. Press Menu.
2.
Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Parallel Configuration
3. Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
Parallel Configuration
Interface Type
5.
Press Enter to display the current value.
6. Press Scroll
↑
or Scroll
↓
until the desired value for Interface Type is displayed.
7.
Press Enter.
An asterisk (*) will be displayed in front of the selected value.
8. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Input Buffer Size
This parameter allows you to select the size of input buffer to be used. The
following values are:
v
256
v
2K
v
12K
v
32K (Default)
v
64K
To change or check the Input Buffer Size:
1. Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Parallel Configuration
3.
Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
Parallel Configuration
Input Buffer Size
Chapter 9. Parallel and Serial Configuration
135