IBM 4247 Model 003, User Manual

Page: 139 / 392

10. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Printer Compatibility 7 (Condensed Print)
This parameter is displayed when emulation mode is set to 4247, 4202 III XL, or
2381 Personal Printer.
You can set the printer CPI value for condensed print when a Shift In control is
received from the data stream. For more information, see the IBM 4247 Printer
Model 001 Programming Reference.
You can set this value to:
v
15
v
16.7
v
17.1 (Default)
To change or check condensed print, follow these steps:
1. Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Parallel Configuration
3.
Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
Parallel Configuration
Printer Compatibility
5. Press Enter.
6. Press Scroll
↑
or Scroll
↓
until the printer displays
Printer Compatibility
(Condensed Print)
7. Press Enter to display the current value.
8.
Press Scroll
↑
or Scroll
↓
until the desired value for Condensed Print is
displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
10. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Printer Compatibility 8 (Slashed Zero)
You can set this value to:
Disabled (Default)
All printed zeros will appear without a slash.
Enabled
All printed zeros will appear with a slash.
To change or check the slashed zero, follow these steps:
Chapter 9. Parallel and Serial Configuration
129