IBM 4247 Model 003, User Manual

Page: 110 / 392

6. Press Scroll
↑
or Scroll
↓
until the printer displays
Printer Compatibility
1 (CR at MPP+1)
7. Press Enter to display the current value.
8. Press Scroll
↑
or Scroll
↓
until the desired value for carriage return is
displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
10.
Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Printer Compatibility 2 (New Line at MPP + 1)
You can set the printer to automatically execute a new line at one position past the
current Maximum Print Position value. You can set this value to:
Standard (Default)
An automatic new line executes at MPP + 1, then a new line executes. The
next print position will be the first print position of the current line + 2.
Alternate
No automatic new line executes. The new line executes at MPP + 1. The
next print position will be the first print position of the next line.
Note: The printer performs a partial reset to put any change to this parameter
value into effect when you exit the Configuration Menu with Start or
Return
. Buffered data will be lost.
To change or check the new line at MPP + 1, follow these steps:
1. Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
4.
Press Scroll
↑
or Scroll
↓
until the printer displays
Coax Configuration
Printer Compatibility
5. Press Enter.
6. Press Scroll
↑
or Scroll
↓
until the printer displays
Printer Compatibility
2 (NL at MPP+1)
7.
Press Enter to display the current value.
8. Press Scroll
↑
or Scroll
↓
until the desired value for a new line at MPP + 1 is
displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
100
4247 Model 003 User’s Guide