IBM 4002-Y2A, Installation And User Manual

Page: 7 / 96

Figures
1. 4002-Y2A and Y2C front panel . . . . . . 2
2. 4002-Y4A and Y4C front panel . . . . . . 2
3. 4002-Y2B front panel . . . . . . . . . . 2
4. 4002-Y4B front panel . . . . . . . . . . 2
5. 4002-Y2B and 4002-Y4B rear panel . . . . . 3
6. 4002-Y2A, Y4A, and Y2C and Y4C rear panels 3
7. Two-port 10 Gbps XFP module . . . . . . 6
8. Four-port 1 Gbps SFP module . . . . . . . 7
9. Four-port 10 Gbps SFP+ module . . . . . . 7
10. Port status LEDs . . . . . . . . . . . 8
11. System status LEDs . . . . . . . . . . 9
12. Power status LEDs . . . . . . . . . . 9
13. Port status LEDs . . . . . . . . . . . 11
14. System status LEDs . . . . . . . . . . 11
15. Power status LEDs . . . . . . . . . . 12
16. 4002-Y2B and 4002-Y4B AC power supply
receptacle .
. . . . . . . . . . . . 13
17. 4002-Y2A, Y4A, Y2C, and Y4C AC power
supply receptacle
. . . . . . . . . . 13
18. Attaching the adhesive feet . . . . . . . 17
19. Attaching the brackets for 4002-Y2B and
4002-Y4B
. . . . . . . . . . . . . 18
20. Attaching the brackets for 4002-Y2A, Y4A,
Y2C, and Y4C .
. . . . . . . . . . . 18
21. Installing the device in a rack . . . . . . 19
22. Connecting switches in linear (top) and ring
(bottom) topology stacks .
. . . . . . . 20
23. Connecting 4002-Y2A, Y4A, Y2C, and Y4C
devices in a linear stack topology .
. . . . 21
24. Connecting 4002-Y2A, Y4A, Y2C, and Y4C
devices in a ring stack topology .
. . . . . 21
25. Serial port (DB-9 DTE) pin-out . . . . . . 22
26. Installing a power supply unit . . . . . . 23
27. Installing a fan tray on the 4002-Y2B and
4002-Y4B
. . . . . . . . . . . . . 24
28. Installing a fan tray on the 4002-Y2A, Y4A,
Y2C, and Y4C .
. . . . . . . . . . . 25
29. Installing an optional module . . . . . . 26
30. Installing an optional module on the
4002-Y2A, Y4A, Y2C, and Y4C .
. . . . . 27
31. UTP crossover cable. . . . . . . . . . 34
32. Straight-through cable . . . . . . . . . 35
33. Installing a transceiver in 4002-Y2B and
4002-Y4B devices.
. . . . . . . . . . 37
34. Installing a transceiver in 4002-Y2A, Y4A, Y2C,
and Y4C devices .
. . . . . . . . . . 37
35. Unlocking the bail latch . . . . . . . . 48
36. Removing the fiber optic module . . . . . 48
37. 4002-Y2B and 4002-Y4B device airflow . . . 51
38. 4002-Y2A and 4002-Y4A device airflow 51
39. 4002-Y2C and 4002-Y4C device airflow 52
40. Serial port pinouts . . . . . . . . . . 52
41. Console port pin assignments showing cable
connection options to a terminal or PC .
. . 53
42. Pin assignment and signalling for
10/100BaseTX and 1000BaseT ports
. . . . 53
© Copyright IBM Corp. 2010
v