IBM 3000 6.0.2, Service Manual

Page: 23 / 88

Recovery group events
The following table lists the events that are created for the Recovery group component.
Table 6. Events for the Recovery group component
Event Event Type Severity Message Description Caus
e
User Action
gnr_rg_failed STATE_CHANGE ERROR GNR recoverygroup
{0} is not active.
The recovery group is
not active.
N/A N/A
gnr_rg_found INFO_ADD_ENTITY INFO GNR recovery group
{0} was found.
A GNR recovery group
listed in the IBM
Spectrum Scale
configuration was
detected.
N/A N/A
gnr_rg_ok STATE_CHANGE INFO GNR recoverygroup
{0} is ok.
The recovery group is
ok.
N/A N/A
gnr_rg_vanished INFO_DELETE_ENTITY INFO GNR recovery group
{0} has vanished.
A GNR recovery group
listed in the IBM
Spectrum Scale
configuration was not
detected.
A
GNR
recov
ery
group
,
listed
in the
IBM
Spect
rum
Scale
confi
gurati
on as
moun
ted
befor
e, is
not
found
. This
could
be a
valid
situat
ion.
Run the
mmlsrecoverygroup
command to verify that all
expected GNR recovery
group exist.
Server events
The following table lists the events that are created for the Server component.
Server events
Table 7. Server events
Event Event Type Severi
ty
Message Description Cause User Action
cpu_peci_ok STATE_CHANGE INFO PECI state of
CPU {0} is ok.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
cpu_peci_failed STATE_CHANGE ERRO
R
PECI state of
CPU {0} failed.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part failed.
None.
cpu_qpi_link_ok STATE_CHANGE INFO QPI Link of CPU
{0} is ok.
The GUI
checks the
hardware
state using
xCAT.
The hardware
part is ok.
None.
Chapter 1. Events 11