IBM 2858-A10, Installation And Setup Instructions

Page: 15 / 28

Note: If you have any unused embedded Fibre Channel ports, you should set them offline by using
the following command:
fcadmin config -t unconfig <adapter_name>
2. Connect the RJ-45 to DB-9 adapter from the adapter kit to the console port on the system.
3.
Connect one end of the serial null modem cable to your console, and then connect the other end to
the DB-9 end of the adapter.
5
1
2
3
4
n600007
Figure 8. Using the cable management tray
0c 0d 0a 0b e0b e0a
!
n600008
0c 0d 0a 0b e0b e0a
!
n600010
Installation and setup instructions
9