IBM 22P6401, User Manual

Page: 39 / 58

Part 6: Using tools for advanced configuration
This section provides instructions for advanced configuration in the Web-based
interface.
Advanced configuration
Click Advanced Configuration to display the Advanced Configuration table.
LAN configuration
To configure your local area network (LAN), click
Advanced Configuration
,
and then click LAN Configuration to display the Lan Configuration table.
In this table, you can change the TCP/IP settings of the Ethernet LAN interface
of the Gateway.
v
MAC Address : This changes the media access control (MAC) address of the
LAN interface. It is displayed in six pairs of hexadecimal numbers.
Note: This field is read-only.
v
LAN IP Address : This is the IP address of the LAN interface of the
Gateway. The IP address value uses dotted decimal notation (N.N.N.N, with
N being a value from 0 to 255). The default is
192.168.1.1
. This is the IP
address that client computers on the LAN use as their default gateway, as
well as on their DNS server if you want to use the built-in DNS feature of
the Gateway.
© Copyright IBM Corp. 2001
6-1